Cara Mengatasi Porositas dan Penyusutan pada Pengecoran Horizontal? Tips Pencegahan yang Efektif

16 April 2026

Porosity and shrinkage in horizontal molding cause scrap; use sand casting molding machine to troubleshoot and prevent.

This guide details troubleshooting methods for porosity and shrinkage in horizontal molding, using sand casting molding machine to prevent defects and improve casting quality for B2B buyers.

Explore horizontal molding defect solutions and sand casting molding machine applications below.

Understanding Porosity Defects in Horizontal Molding

Porosity is one of the most common and costly defects in horizontal molding, which seriously impairs the strength, tightness, and overall quality of castings produced by horizontal molding.

Porosity refers to small, scattered holes—either on the surface or inside the casting—that form when gas becomes trapped during the horizontal molding process. These holes reduce the casting’s density, making it prone to fracture under stress, leakage in pressure-bearing applications, and even complete product failure. The mesin cetak pasir plays a pivotal role in controlling porosity in horizontal molding, as its performance directly influences the efficiency of gas discharge during the molding and pouring stages.
According to industry data, porosity defects account for 35%-40% of all horizontal molding defects, leading to a scrap rate of 8%-12% in unoptimized production lines. Common causes of porosity in horizontal molding include poor sand permeability, excessive moisture in the molding sand, improper gating system design, and insufficient venting. When using a mesin cetak pasir for horizontal molding, overly high sand compaction pressure can reduce sand permeability, trapping gas in the mold cavity and forming porosity.

Understanding the characteristics and root causes of porosity is the first critical step in troubleshooting and preventing this defect in horizontal molding, and proper adjustment of the sand casting molding Machine’s parameters is key to resolving this issue effectively.

Molding Machine

Troubleshooting Porosity Defects in Horizontal Molding with Sand Casting Molding Machine

Troubleshooting porosity defects in horizontal molding requires targeted, data-driven measures, and the sand casting molding Machine is the core tool to implement these solutions.

First, inspect and optimize the molding sand used in horizontal molding: ensure the sand has optimal permeability and moisture content (ideally 3%-5% for most horizontal molding applications). The mesin cetak pasir can be adjusted to control compaction pressure—reducing it appropriately to improve sand permeability, allowing trapped gas to escape smoothly during horizontal molding.
Second, evaluate and modify the gating system of the sand casting molding machine: an unreasonable gating system design will cause turbulent molten metal flow, trapping gas in the mold. Adjust the gating system to ensure molten metal flows smoothly, carrying gas out of the mold cavity.
Third, check the venting system of the sand casting molding machine: ensure vents are unobstructed, properly placed, and sized to facilitate efficient gas discharge during horizontal molding.

Additionally, preheat the mold and molten metal to reduce gas generation—this step is easily managed with the temperature control features of modern sand casting molding Machine. Chong Jen Machinery, with years of expertise in horizontal molding and sand casting molding Machine manufacturing, has helped numerous B2B clients reduce porosity defects by 70% or more through customized equipment adjustments and process optimization, ensuring their horizontal molding operations run efficiently and cost-effectively.

Molding Machine

Understanding Shrinkage Defects in Horizontal Molding

Shrinkage is another devastating common defect in horizontal molding, occurring when molten metal shrinks during solidification, leaving behind cavities, depressions, or cracks in the casting.

Unlike porosity, shrinkage defects are typically larger, more concentrated, and often form in thick-walled sections of castings produced by horizontal molding. These defects not only ruin the casting’s appearance but also drastically reduce its mechanical properties, making it unable to meet industry standards or customer requirements.
The sand casting molding machine has a significant impact on shrinkage defect occurrence, as its mold temperature control, pouring parameter adjustment, and mold design compatibility directly influence the molten metal’s solidification process in horizontal molding. Industry data shows that shrinkage defects can increase production costs by 15%-20% due to scrap, rework, and material waste.
Common causes of shrinkage in horizontal molding include uneven casting wall thickness, improper pouring temperature, insufficient feeding systems, and uneven mold cooling. When using a sand casting molding machine for horizontal molding, uneven mold cooling speeds can cause molten metal to solidify too quickly in some areas, leading to inadequate feeding and subsequent shrinkage. Mastering the causes and characteristics of shrinkage is essential for effective prevention and troubleshooting in horizontal molding operations.

Clay sand moulding machine

Troubleshooting Shrinkage Defects in Horizontal Molding with Sand Casting Molding Machine

Troubleshooting shrinkage defects in horizontal molding requires optimizing the entire horizontal molding process and leveraging the full capabilities of the sand casting molding machine.

First, adjust the casting design to ensure uniform wall thickness—thick-walled sections are the primary hotspots for shrinkage, as they cool more slowly and require additional molten metal feeding. The mesin cetak pasir can be used to produce molds with uniform thickness, providing a stable foundation for consistent molten metal solidification in horizontal molding.
Second, precisely control pouring temperature and speed using the sand casting molding machine’s intelligent control system: excessively high pouring temperatures increase molten metal shrinkage volume, while overly low temperatures cause incomplete filling. The sand casting molding machine’s precise temperature and speed controls ensure molten metal solidifies uniformly, minimizing shrinkage risk.
Third, optimize the feeding system by adding risers in key positions using the sand casting molding machine—risers supply additional molten metal during solidification, preventing shrinkage in thick-walled areas.

Additionally, adjust the sand casting molding machine’s mold cooling system to ensure uniform mold temperature, avoiding local overheating or excessive cooling in horizontal molding. These measures, combined with the sand casting molding machine’s advanced performance, can effectively eliminate shrinkage defects and improve the quality of castings produced by horizontal molding.

casting molding

Preventive Measures for Porosity and Shrinkage in Horizontal Molding

Preventing porosity and shrinkage defects in horizontal molding is far more cost-effective than troubleshooting them after they occur, and the sand casting molding machine is the cornerstone of implementing these preventive strategies.

First, optimize the quality of molding sand for horizontal molding: use high-quality sand with appropriate permeability, moisture, and strength, and regularly test and adjust sand parameters using the sand casting molding machine’s built-in monitoring features.
Second, standardize the operation of the sand casting molding machine: ensure compaction pressure, mold temperature, and pouring parameters are set correctly for each horizontal molding job, and conduct regular maintenance to keep the sand casting molding machine in optimal condition.
Third, design a scientific gating and feeding system: use the sand casting molding machine to produce molds with well-positioned gates and risers, facilitating efficient gas discharge and molten metal feeding during horizontal molding.
Fourth, preheat molds and molten metal as needed—many modern mesin cetak pasir models come equipped with integrated preheating functions to control mold temperature precisely, reducing gas generation and shrinkage. The table below, based on data from Chong Jen Machinery’s technical team, shows the impact of preventive measures on defect rates in horizontal molding:

Preventive Measure	Reduction in Porosity Defects	Reduction in Shrinkage Defects	Overall Scrap Rate Reduction
Optimize Sand Quality (via Sand Casting Molding Machine)	65%-70%	40%-45%	50%-55%
Standardize Sand Casting Molding Machine Operation	55%-60%	50%-55%	52%-58%
Optimize Gating/Feeding System	70%-75%	60%-65%	65%-70%

Common Pitfalls to Avoid in Horizontal Molding Defect Troubleshooting

B2B buyers and operators often encounter common pitfalls when troubleshooting porosity and shrinkage in horizontal molding, which can lead to prolonged downtime, increased costs, and persistent defects.

One major pitfall is ignoring the connection between sand casting molding machine maintenance and defect occurrence—worn components (such as compaction plates or temperature sensors) can cause inconsistent performance, leading to recurring porosity or shrinkage. Regular maintenance of the mesin cetak pasir, including component inspection and replacement, is critical to avoiding this issue.
Another pitfall is over-reliance on manual adjustments instead of leveraging the sand casting molding machine’s intelligent features; modern sand casting molding machine models offer real-time parameter monitoring and automatic adjustments, which are far more accurate than manual interventions for horizontal molding.
A third pitfall is neglecting the impact of molding sand quality on horizontal molding defects—many operators use subpar sand or fail to adjust sand parameters, leading to preventable porosity. Chong Jen Machinery recommends conducting regular sand quality tests and using the mesin cetak pasir’s sand conditioning features to ensure optimal sand performance, which is key to minimizing defects in horizontal molding.

molding machine

How Sand Casting Molding Machine Enhances Horizontal Molding Quality

The sand casting molding machine is the backbone of high-quality horizontal molding, as it provides the precision, consistency, and control needed to prevent porosity and shrinkage defects.

Unlike traditional molding equipment, modern sand casting molding machine models are equipped with advanced features that streamline horizontal molding operations and reduce human error. For example, automated sand feeding and compaction ensure uniform sand density in the mold, improving permeability and reducing gas trapping (a leading cause of porosity). The mesin cetak pasir’s precise temperature control system maintains consistent mold and molten metal temperatures, promoting uniform solidification and minimizing shrinkage.

Selain itu, banyak model mesin cetak pasir menawarkan fitur deteksi cacat terintegrasi, yang memungkinkan operator untuk mengidentifikasi potensi masalah secara real-time selama pencetakan horizontal, sebelum cacat menjadi mahal. Bagi pembeli B2B, berinvestasi dalam mesin cetak pasir berkualitas tinggi mesin cetak pasir bukan sekadar pembelian—ini adalah investasi dalam kualitas pencetakan horizontal yang konsisten, tingkat limbah yang berkurang, dan efisiensi operasional jangka panjang. Model mesin cetak pasir Chong Jen Machinery dirancang khusus untuk menghadapi tantangan unik dari pencetakan horizontal, dengan fitur yang dapat disesuaikan untuk memenuhi berbagai kebutuhan dari berbagai industri dan aplikasi pengecoran.