Why Is Sandblasting Booth Noisy? Practical Noise Reduction Methods

21º Abril 2026

Sandblasting booth noise disturbs workers and violates standards; use practical methods to reduce it effectively.

This guide shares actionable noise reduction methods for sandblasting booth, helping B2B buyers lower noise to safe levels while maintaining operational efficiency.

Discover easy, cost-effective ways to reduce sandblasting booth noise below.

Method 1: Optimize Sandblasting Booth Sealing to Block Noise Leakage

Poor sealing is one of the main causes of excessive sandblasting booth noise, as gaps in the booth body allow noise to escape and amplify.

Most sandblasting booths generate 85-95dB of noise during operation, and unsealed gaps can increase this by 5-10dB, exceeding the industrial safety limit of 85dB. To fix this, inspect the sandblasting booth’s doors, windows, and ventilation ports for gaps, then seal them with high-density sound-insulating rubber strips.
Additionally, line the inner walls of the sandblasting booth with 50mm thick sound-absorbing cotton, which absorbs 60-70% of internal noise and prevents it from transmitting outward.Chong Jen Machinery designs sandblasting booth with integrated sealing structures, ensuring no gaps in the booth body and built-in sound-absorbing linings, which reduce initial noise by 10-12dB without affecting sandblasting operations. This simple optimization is low-cost and easy to implement, making it ideal for existing sandblasting booth upgrades.

Method 2: Improve Sandblasting Booth Internal Components to Reduce Vibration Noise

Vibration from internal components is another major noise source of sandblasting booth, especially from the blast gun, air compressor, and abrasive delivery system.

When the blast gun vibrates excessively, it creates loud, continuous noise that reverberates inside the sandblasting booth. To reduce this, install shock-absorbing brackets for the blast gun and air compressor, which dampen vibration and cut noise by 8-10dB.
Replace worn blast gun nozzles with anti-vibration ceramic nozzles, as they reduce airflow turbulence and vibration during operation.

Regularly lubricate the sandblasting booth’s abrasive conveyor and air pipes to minimize friction-induced noise. The table below shows noise reduction effects of these improvements for a standard sandblasting booth:

Improvement Measure	Noise Reduction Effect	Sandblasting Booth Noise After Improvement
Shock-Absorbing Brackets	8-10dB	80-85dB
Anti-Vibration Nozzles	6-8dB	82-87dB
Sound-Absorbing Linings	10-12dB	78-83dB

Method 3: Upgrade Sandblasting Booth Ventilation System for Quiet Operation

The ventilation system of a sandblasting booth often generates loud noise due to high airflow speed, which adds to the overall noise level.

To address this, replace the sandblasting booth’s ventilation fan with a low-noise, high-efficiency model, which reduces fan noise by 10-15dB while maintaining sufficient air circulation. Install a muffler on the ventilation inlet and outlet of the sandblasting booth to dampen airflow noise.
Additionally, adjust the ventilation speed to the minimum required for dust removal—excessive airflow not only increases noise but also wastes energy. Chong Jen Machinery’s custom sandblasting booth is equipped with optimized ventilation systems, combining low-noise fans and mufflers to ensure the sandblasting booth opera silenciosamente enquanto atende aos padrões ambientais e de segurança, ajudando os compradores B2B a evitar violações de ruído e proteger a saúde dos trabalhadores.