Under Different Working Conditions, How to Adjust the Parameters of Sand Blast Rooms?

16th มีนาคม 2026

Incorrect Sand Blast Rooms parameter adjustment causes poor results; this guide teaches tuning based on conditions and blast sand type.

This guide details how to adjust Sand Blast Rooms parameters under different working conditions, matching blast sand to ensure optimal blasting effect.

Learn targeted parameter adjustment methods for different Sand Blast Rooms working conditions.

How to Adjust Sand Blast Rooms Parameters for Light-Duty and Heavy-Duty Working Conditions?

Adjusting Sand Blast Rooms parameters based on light-duty and heavy-duty conditions is key to ensuring efficiency and blast sand utilization.

For light-duty conditions (e.g., small workpieces, minor rust removal), set the Sand Blast Rooms pressure to 0.3-0.5MPa, select fine blast sand (0.2-0.4mm) to avoid workpiece damage. Reduce blast sand flow to 3-5kg/min, ensuring uniform blasting without waste.
For heavy-duty conditions (e.g., large workpieces, thick rust), increase Sand Blast Rooms pressure to 0.6-0.8MPa, use coarse blast sand (0.6-1.0mm) for stronger cleaning.

Boost blast sand flow to 6-8kg/min, and extend blasting time appropriately. Regardless of the condition, check blast sand quality regularly—clean, dry blast sand ensures stable Sand Blast Rooms operation and consistent results.

How to Adjust Sand Blast Rooms Parameters for Different Blast Sand Types and Workpiece Materials?

Matching Sand Blast Rooms parameters to blast sand types and workpiece materials ensures ideal results and avoids damage.

For aluminum shot blast sand (soft, non-abrasive), set Sand Blast Rooms pressure to 0.4-0.6MPa, with a moderate blast sand flow of 4-6kg/min, suitable for delicate workpieces.
For steel shot blast sand (hard, wear-resistant), increase pressure to 0.5-0.7MPa, adjust blast sand flow to 5-7kg/min for heavy-duty cleaning.
สำหรับชิ้นงานสแตนเลส, ให้ใช้ทรายละเอียดและลดความดันในห้องพ่นทรายเพื่อลดรอยขีดข่วน.
สำหรับเหล็กกล้า, ให้ใช้ทรายหยาบและเพิ่มความดัน ปรับพารามิเตอร์เป็นประจำตามการสึกหรอของทรายพ่นและข้อเสนอแนะแต่ละชิ้นงานเพื่อให้ Sand Blast Rooms ทำงานได้อย่างมีประสิทธิภาพ.